EXP-WFB00 is Embest self-developed a high-performance WiFi & Bluetooth module based on JORJIN commercial grade WG7831-D0 WiFi module. This module support WLAN (2.4) and BT, the default for the plate antenna, using adaptive synchronization channel, point to point and point to multipoint transmission mode. One of the Embest 12*2pin standard connector supports SDIO, UART, PCM and other signal.

Features： 

 Electrical Features:

• Operating temperature: -20~75°C (Commercial grade), -40~85°C (Industrial grade)

• Input voltage: 3.3V

• Operating humidity: 20% ~ 90% (No condensation)

• Module size: 35.3mm×29.28mm

• PCB specifications: 2 layer design

 Module Features:

• WLAN, Bluetooth on a SiP module

• LGA106 pin package

• Dimension 12.8mm(L) x 12mm(W) x 1.7mm(H)

• Support for BLE (BT Low Energy) mode

• Seamless integration with TI OMAP application processor

• Supported UART for BT/ BLE/ANT and SDIO for WLAN

• Provides efficient direct connection to battery (2.7-4.3V) by employing several integrated switched mode

  power supplies (DC2DC). Internal DC2DC can be used to power external devices

• WLAN, Bluetooth cores software and hardware compatible with prior WL127x, WL128x and NL5500

  offerings, for smooth migration to Device

• Shared HCI transport for BT/BLE/ANT over UART and SDIO for WLAN

• Bluetooth 4.0, BLE, ANT and all audio processing features can work in parallel and include full

  coexistence with WLAN

• Simultaneous BT with BLE and ANT, including full coexistence with WLAN
  

 Communication Interface:

• One 12 * 2 Pin Embest standard connector module (including SDIO, PCM, UART, WLAN, Bluetooth, power supply, etc.),this standard connector module with two 2.0mm spacing pin header (JA and JB)  is connected to the socket of mainboard.

 Support Device List:

• SOM-PH8800+BB-EPH1800platform

• SOM-SM8800+BB-ESDSM00platform

• SOM-SM9300+BB-ESDSM00platform