Tower B 4/F, Shanshui Building, Yungu Innovation Industry Park, Liuxian Ave. #4093, Nanshan District, Shenzhen ,Guangdong , China
CPU Module Features:
Processor AT91SAM9G25
CPU Module Size:67mm*34mm
12MHz crystal oscillator
32.768MHz crystal oscillator
128MB DDR2 memory
256MB nandflash memory with chip selection control switch
4MB SPI Serial dataflash with chip selection control switch
64KB EEPROM
256B 1-wire EEPROM
On-board power regulation
Two user LEDs
For PHY, this depnds on our manufacture for different batch.If you need to confirm, pls mail to Sales.arm@embest-tech.com
The MBM-SAM-9X Base Board is a common main board to connect 9m10 CPU Module & 9x5 CPU Module.
Base Board Size:181mm*165mm
Supply Voltage:5V DC
Supply Current:2A
Temperature Range:0~70℃
ONE WIRE EPPROM(1024-bit);
1×JTAG Interface;
1×Camera Interface(9M10 and 9G25);
2×24 bit LCD Interface(Resistive Touch Panel);
1×DBGU Interface(3-wire);
2×UART Serial Port(1×5-wire、1×3-wire);
2×10/100Mb Ethernet Interface(CPU Module and base board each have a PHY chip);
2×RS485 Interface;
2×CAN Bus Interface;
1×Smart DAA interface;
2×USB 2.0 Host Interface;
1×USB High-Speed USB2.0 OTG Interface;
4×touch buttons(QTOUCH);
2×physical buttons(reset,wakeup);
1×Micro SD Interface;
1×SD card Interface;
3×user LED;
1×Analog Output (connected to speaker by default)
1×Analog Input(connected to potentiometer by default)
1×RTC Unit (without battery);
50 GPIO User Extension Interface
NO.
2
3
4
5
6
7
Type
function
Desciprion
Bootloader
AT91Bootstrap
Guide to Uboot
Uboot
1.Support NandFlash to erase,read and write2. Support net to download Image3.Support to set and keep environment variables4.Support memory to appear , compare and modify 5. Support boot and bootargsto set
Kernel
Ethernet driver
ETH0
Serial driver
USART0
USART3
DBGU
USB
USB_HOST*2
USB_OTG
SD card driver
Micro SD
SD Card
Camera driver(ISI)
SMD driver
TWI driver
Qtouch key driver
DMA driver
GPIO driver
File system
Angstrom file system
粤公网安备 44030502001192号