Overview:

Onboard Interfaces and Connectors:

 System block diagram:

Mechanical Size:

Hardware Features:

  Processor/Memory:

• Atmel ARM926EJ-S™ 32-bit processor running at up to 400MHz

• 16KB data cache, 16KB instruction cache, memory management unit

• 64KB internal ROM and 32KB internal SRAM

• High bandwidth multi-port DDR2 controller

• 32-bit external bus interface supporting 8-bank DDR2 memories and static memories

• MLC/SLC NAND controller, with up to 24-bit Programmable Multi-bit Error Correcting Code (PMECC)

I/Os/Interfaces:

• Four 32-bit GPIOs, of which 105 programmable I/O lines are multiplexed with up to three peripheral I/Os

• LCD controller supporting resolution of up to 800×600

• USB device high speed, USB host high speed and USB host full speed with dedicated on-chip transceiver

• One 10/100 Mbps Ethernet MAC controller

• One watchdog

• Two high-speed memory card hosts

• Two CAN controllers

• Two SPI interfaces

• Two 3-channel 32-bit timers/counters

• One SSC controller (I2S)

• One 4-channel 16-bit PWM controller

• Three I2C interfaces

• Three USARTs, two UARTs

• One 12-channel 10-bit 1 ADC (Touch-Screen)

• Soft modem

• Four 32-bit GPIOs, of which 105 programmable I/O lines are multiplexed with up to three peripheral I/Os

Electrical Features:

• Operating Temperature: -10 ℃ ~ 70 ℃

• Storage Temperature: -20 ℃ ~ 85 ℃

• Operating Humidity: 0% ~ 90% (Non-condensing)

• Power Supply: 3.3V/1.25A

• Electrical Standards: CE, FCC and CCC

• Hardware Dimensions: 64mm×45mm

• PCB Layers: 6-layer PCB

Software Features:

• Supporting Linux2.6.39 operating system

• Supporting Linux QT graphic

• Supporting multiple filesystems such as ROM/CRAM/EXT2/EXT3/FAT/NFS/JFFS2/YAFFS2/UBIFS